Journal Articles (* indicates student- or postdoctoral advisees)
2022
- Okpala, I.*, Nnaji, C., and Gambatese, J. (2022) “Assessment Tool for Human-Robot Interaction Safety Risks during Construction Operations” Journal of Construction Engineering and Management (Accepted)
- Osei-Kyei, R. Jin, X., Nnaji, C., Wuni, I., and Akomea-Frimpong, I. (2022). “Review of Risk Management Studies in Public-Private Partnerships: A Scientometric analysis.” International Journal of Construction Management
- Okoro, C., Nnaji, C., Adediran, A. (2022). “Determinants of Immersive Technology Acceptance in the Construction Industry: management perspective.” ECAM
- Afolabi, A.O.; Nnaji, C.; Okoro, C. (2022). “Immersive Technology Implementation in the Construction Industry: Modeling Paths of Risk.” Buildings
- Nnaji, C., Jin, Z., and Karakhan A. (2022) “Safety and Health Management Response to COVID-19 in the Construction Industry: A Perspective of Fieldworkers” Journal of Process Safety and Environmental Protection
- Ibrahim, A.*, Nnaji, C., and Shakouri, M. (2022). “Influence of Sociodemographic Factors on Construction Fieldworkers’ Safety Risk Assessments.” Sustainability, 14(1), 111.
2021
- Omobolanle, O., Gonslaves, N., Akanmu, A., and Nnaji, C.(2021). “Assessment of a Passive Wearable Robot for Reducing Low Back Disorders during Rebar Work” Journal of Information Technology in Construction.
- Nnaji, C. and Awolusi, I. (2021) “Critical Success Factors Influencing WSD Implementation in AEC Industry. Technological and Society
- Omobolanle, O., Gonslaves, N., Akanmu, A., and Nnaji, C. (2021). “Digital Twin Driven Framework for Improving Self-management of Ergonomic Risks” Journal of Smart and Sustainable Built Environment
- Akanmu, A., Ogunseiju, O., Olayiwola, J., and Nnaji, C. (2021). “Recognition of Worker Actions from Time-Series Signal Images using Deep Convolutional Neural Network.” Journal of Smart and Sustainable Built Environment
- Okpala, I.*, Nnaji, C., Awolusi, I., and Akanmu, A. (2021). “Success Model for Implementing Wearable Sensing Devices in The Construction Industry” Journal of Construction Engineering and Management
- Okpala, I.*, Nnaji, C., and Awolusi, I. (2021). “Wearable Sensing Devices Acceptance Behavior in Construction Safety and Health: Assessing Existing Models and Developing a Hybrid Conceptual Model” Construction Innovation
- Nnaji, C., Awolusi, I., Park, J., and Albert, A. (2021). “Wearable Sensing Devices: Towards the Development of a Personalized System for Construction Safety and Health Risk Mitigation.” Sensors.
2020
- Uddin, J., Albert, A., Alsharef, A., Pandit, B., Patil, Y., and Nnaji, C. (2020) “Hazard Recognition Patterns Demonstrated by Construction Workers” International Journal of Environmental Research and Public Health
- Ogunrinde, O.*, Nnaji, C., and Amirkhanian, A. “Development of an Automation Adoption Readiness Index for Quality Management: A Focus on Highway Construction.” Journal of Infrastructural Systems, ASCE
- Ogunrinde, O.*, Nnaji, C., and Amirkhanian, A. “Quality Management Technologies in Highway Construction: Stakeholders’ Perception of Utility, Benefits, and Barriers.” Practice Periodical on Structural Design and Construction ASCE
- Alomari, K., Gambatese, J., Nnaji, C., and Tymvios, N. (2020) “Impact of Risk Factors on Construction Worker Safety: A Delphi Rating.” Arabian Journal for Science and Engineering
- Ogunrinde, O.*, Amirkhanian, A., Corley, M., and Nnaji, C. “Effect of Nighttime Construction on Quality of Asphalt Paving.” Journal of Construction Engineering and Management, ASCE
- Nnaji, C., Karakhan, A., Lee, H and Gambatese, J. (2020). “A Case Study to Evaluate Work Zone Safety Technologies in Highway Construction.” Practice Periodical on Structural Design and Construction ASCE
- Nnaji, C. and Karakhan, A. (2020). “Technologies for safety and health management in construction: Current use, implementation benefits and limitations, and adoption barriers” Journal of Building Engineering
- Nnaji, C., Jafarnejad, A., and Gambatese, J. (2020). “Effects of Wearable Light Systems on Safety of Highway Construction Workers” Practice Periodical on Structural Design and Construction ASCE
- Nnaji, C., Gambatese, J., Karakhan, and Osei-Kyei, R. (2020). “Development and Application of Safety Technology Decision-making Adoption Tool” Journal of Construction Engineering and Management, ASCE
- Nnaji, C., Okpala, I.*, and Awolusi, I. (2020). “Wearable Sensing Devices and Accident Prevention: Potential Impact and Current Use” Professional Safety, ASSP
- Okpala, I.*, Nnaji, C., Karakhan, A. (2020). “Utilizing Emerging Technologies for Construction Safety Risk Mitigation.” Practice Periodical on Structural Design and Construction ASCE
2019
- Nnaji, C., Gambatese, J., Lee, H.W., and Zhang, F. (2019). “Improving Construction Work Zone Safety Using Technology: A Systematic Review of Applicable Technologies.” Journal of Traffic and Transportation Engineering
- Nnaji, C., Gambatese, J., Karakhan, A., and Eseonu, C. (2019). "Influential safety technology adoption predictors in construction". Engineering, Construction and Architectural Management.
2018
- Nnaji, C., Lee, H., and Gambatese, J. (2018). “Work Zone Intrusion: Technology to Reduce Injuries and Fatalities.” Professional Safety, 63(04), 36-41
- Karakhan, A., Rajendran, S., Gambatese, J., and Nnaji, C. (2018). “Measuring and Evaluating Safety Maturity of Construction Contractors: Application of Choosing by Advantages Decision-Making Method.” Journal of Construction Engineering and Management, 144(7), 04018054
- Nnaji, C., Lee, H., Karakhan, A., and Gambatese, J. (2018). “Development of Decision-Making Framework to Select Safety Technologies for Highway Construction.” Journal of Construction Engineering and Management, ASCE
- Lee, H., Harapanahalli, B., Nnaji, C., Kim, J. and Gambatese, J. (2018). “Feasibility of using QR Codes in Highway Construction Document Management.” Transportation Research Record, 0361198118776133
Book Chapters
- Okpala, I*., Nnaji, C., Ogunseiju, O., and Akanmu, A. (in press). Assessing the Role of Wearable Robotics in Construction Industry: Potential Safety Benefits, Opportunities, and Implementation Barriers. Automation and Robotics in the Architecture Engineering, and Construction Industry. Springer
- Karakhan, A., Xu, Y., Nnaji, C. , and Alsaffar, O. (2019). "Technology Alternatives for Workplace Safety Risk Mitigation in Construction: Exploratory Study." In Advances in Informatics and Computing in Civil and Construction Engineering (pp. 823-829). Springer, Cham.
Conference Papers
2022
- Okonkwo, C., Awolusi, I. and Nnaji, C. (2022) “Privacy and Security in the Use of Wearable Internet of Things for Construction Safety and Health Monitoring” CIB 2022
- O’Leary, J., Awolusi, I., Alzarrad, A., and Nnaji, C. (2022). “Eco-efficient Construction: The Utilization of Nanotechnology and 3D Printing in the Sustainable Building Practices of the AEC Industry.” EPiC Series in Built Environment, 3, 461-469.
- Ibrahim, A.*, Okpala, I.*, Nnaji, C., Namian, M. and Koh, A. (2022) The Impact of Fatigue on Hazard Recognition: An Objective Pilot Study.” ICCEPM
- Khan, M.*, Mccrary, M.*, Nnaji, C., and Awolusi, I. (2022) “Worker Safety in Modular Construction: Investigating Accident Trends, Safety Risk Factors, and Potential Role of Smart Technologies ICCEPM
- Awolusi, I., Sulbaran, T., Song, S. Nnaji, C. and Ostadalimakhmalbaf, M. (2022) “Safety Education in the Curriculum of Construction Programs.” ICCEPM
- Sanni, T.*, Nnaji, C., Awolusi, I., Al-Bayati, A. (2022) “Safety Innovation Adoption in Construction: Role of Safety Compliance and Safety Attitude”
- Namian, M., Al-Bayati, A., Nnaji, C., (2022) “Role of Safety Training in Reducing Fatigue Among Construction Workers” In Construction Research Congress 2022: Health, Safety and Workforce Issues. Reston, VA: American Society of Civil Engineers.
- Awolusi, I., Martinez-Molina, A. Nnaji, C., Alamaniotis, M. and Sulbaran. (2022) “Utility of Wearable Sensing Devices for Environmental Monitoring on Construction Sites
- Ibrahim, A.*, Nnaji, C., Shakouri, M., and Namian, M. (2022) Impact of Hazard State on Construction Workers Safety Risk Assessment
- Ibrahim, A.*, Nnaji. C., Jin, Z. (2022). Biomechanical Analysis in Construction Engineering and Management Research: A Review
- Okpala, I*., Nnaji, C., and Gambatese, J. (in press). “Investigating Hazards and Safety Risks inherent in Human-Robot Interactions”. In Construction Research Congress 2022: Health, Safety and Workforce Issues. Reston, VA: American Society of Civil Engineers.
- Okpala, I*., Sanni, T., and Nnaji, C. (in press). “Noise Management in Construction: Identifying Strategies and Controls for Improvement”. In Construction Research Congress 2022: Health, Safety and Workforce Issues. Reston, VA: American Society of Civil Engineers.
2021
- Jalalpour, M.* and Nnaji, C. (2021), “Investigating the Impact of Trombe Wall on Building Energy Saving and Thermal Comfort - A Case Study.” CSCE 2021 Annual Conference
- Omobolanle, O., Gonslaves, N., Akanmu, A., and Nnaji, C. (2021). “Subjective Evaluation of Passive Back-Support Exoskeleton for Flooring Work.” Associated School of Construction
- Gonslaves, N., Omobolanle, O., Akanmu, A., and Nnaji, C. (2021). “Influence of a Back-Support Exoskeleton on Physical Demands of Rebar Work.” Associated School of Construction
2020
- Ogunseiju, O., Olayiwola, J., Akanmu, A., and Nnaji, C. (2020). “Digital Twin Driven Musculoskeletal Injury Prevention System.” CONVR 2020
- Moynihan, G., Lyu,Q.*, and Nnaji, C. (2020) “Developing a Decision Support Tool for Quantification and Reduction of Construction Material Waste” IEMS
- Karakhan, A., Gambatese, J., Simmons, D., and Nnaji, C. (2020). “Workforce Development and Sustainability in Construction” In Construction Research Congress 2020: Computer Applications and Simulation, Advanced Technologies, and Data Analytics.
- Shakouri, M., Nnaji, C., and Karakhan, A. (2020). “Alternative Risk Models for Optimal Investment in Portfolio-based Community Solar.” In Construction Research Congress 2020: Computer Applications and Simulation, Advanced Technologies, and Data Analytics.
- Ogunrinde, O.*, Nnaji, C., Amirkhanian, A. (2020). “Application of Emerging Technologies for Highway Construction Quality Management: A Review.” In Construction Research Congress 2020: Computer Applications and Simulation, Advanced Technologies, and Data Analytics.
- Okpala, I.*, Parajuli, A.*, Nnaji, C. and Awolusi, I. (2020). “Assessing the Feasibility of Integrating Internet of Things into Safety Management Systems: A focus on Wearable Sensing Devices.” In Construction Research Congress 2020: Computer Applications and Simulation, Advanced Technologies, and Data Analytics.
- Awolusi, I., Nnaji, C. and Okpala, I.* (2020). “Success Factors for the Implementation of Wearable Sensing Devices for Safety and Health Monitoring in Construction.” In Construction Research Congress 2020: Computer Applications and Simulation, Advanced Technologies, and Data Analytics.
2019
- Okpala, I.,* Nnaji, C. and Awolusi, I. (2019). “Emerging Construction Technologies: State of Standard and Regulation Implementation”. 2019 ASCE International Conference on Computing in Civil Engineering, Georgia, USA, June 17-19, 2019
- Nnaji, C., Kim, S. and Okpala, I.* (2019). “A Simulation Framework for Construction Management Technology Adoption Decision Making: A Composite Model”. 2019 ASCE International Conference on Computing in Civil Engineering, Georgia, USA, June 17-19, 2019
- Awolusi, I., Nnaji, C., and Marks, E. (2019). “Enhancing Construction Safety Monitoring Through the Application of Internet of Things and Wearable Sensing Devices: A Review.” 2019 ASCE International Workshop on Computing in Civil Engineering
2018
- Nnaji, C., Gambatese, J., and Karakhan, A. (2018). “Predictors of Construction Safety Technology Adoption.” CIB W099 International Conference, Salvador, Brazil, August 1-3, 2018
- Nnaji, C., Gambatese, J., and Eseonu, C. (2018). “Theoretical Framework for Improving Adoption of Safety Technology in Construction Industry.” In Construction Research Congress 2018 (pp. 356-366).
- Jafarnejad, A., Gambatese, J., and Nnaji, C. (2018). “Illumination and Visibility of Workers in Nighttime Highway Work Zones.” In Construction Research Congress 2018 (pp. 231-240).
2017
- Nnaji, C., Okoro, C. (2017). “Leveraging Public-Private Partnership as an Effective Tool for Infrastructural Development in Emerging Economies: An Integrative Review.” International Conference on Infrastructure Development and Investment Strategies for Africa, Livingstone, Zambia, August 2017
- Nnaji, C., Gambatese, J., Awolusi, I., and Oyeyipo. O. (2017). “Construction Safety Innovation Adoption in Nigeria: A Mixed Method Approach.” CIB W099 International Conference, Cape Town, South Africa, June 11-13, 2017
- Gambatese, J., Nnaji, C., and Christianson, C. (2017). “Contracting for Prevention through Design (PtD): A Case Study.” CIB W099 International Conference, Cape Town, South Africa, June 11-13, 2017
2016
- Nnaji, C. and Gambatese, J. (2016). “Worker Distraction Impacts on Safety and Work Quality: An Energy Component.” Construction Research Congress, ASCE, San Juan, Puerto Rico, May 31–June 2, 2016.
Recent Technical Publications/Reports
- Gambatese, J., Louis, J., and Nnaji, C. (2022) “Alternative Technologies for Mitigating the Risk of Injuries and Deaths in Work Zones: Conduct of Research” NCHRP
- Gambatese, J., Louis, J., and Nnaji, C. (2022) “Guide to Alternative Technologies for Preventing and Mitigating Vehicle Intrusions into Highway Work Zones” NCHRP
- Nnaji, C. and Gambatese, J. (2021). “Approaches to Reducing Intrusion into Electric Utility Work Zones”, EPRI
- Nnaji, C., Gambatese, J., and Okpala, I*. (2021). “Protocol for Assessing Human-Robot Interaction Safety Risks”. Final Report, The Center for Construction Research and Training (CPWR).
- Eseonu, C., Gambatese, J., Nnaji, C. (2018). “Reducing Highway Construction Injuries through Improved Adoption of Safety Technology” CPWR
- Gambatese, J., Lee, H., and Nnaji C. (2017). “Work zone intrusion alert technologies: Assessment and practical guidance.” ODOT Research Unit, Oregon Department of Transportation
- Gambatese, J. and Nnaji C. (2015). “NIOSH Prevention through Design (PtD) Research Study: Construction SliDeRulE Case Studies.” National Institute for Occupational Safety and Health (NIOSH), Education and Information Division